The yard · bringing out the builds

Gallery

Setting up your bench…

The yard · 48 builds on the rack

Gallery

Real builds the engine drew and checked. Pick one, change what you like, and the workshop drafts your version.

Start from scratch

Unrated

48″W × 24″D × 42″H

Pub-Height Table With Foot Rail · 7 parts

I want a pub table, 42 inches to the top, 48 x 24, with a foot rail for the bar stools. Maple. Beefy. I have a full shop.

8/4″ hardwood

Start from this

Unrated

48″W × 20″D × 65″H

Cedar Potting Bench · 9 parts

Potting bench out of cedar, about 48 long and 20 deep. Slatted top and slatted lower shelf, 36 inch counter height, with a back splash and a rail up high for hanging trowels.

2×4

Start from this

Unrated

60″W × 12″D × 42″H

Narrow Bar Counter · 7 parts

Skinny bar-height counter table to go behind our sofa, 60 long, only 12 inches deep, 42 inches high, with one shelf underneath.

¾″ hardwood

Start from this

Unrated

120W × 30D × 80H cm

Slim Oak Console · 7 parts

Slim console, 120 cm x 30 cm and 80 cm high, with a shelf 20 cm off the floor. Oak, legs 4 cm square. Metric only please.

¾″ hardwood

Start from this

Unrated

36″W × 24″D × 22″H

Kids Art Table · 7 parts

Art table for my two kids, 36 x 24 and 22 inches tall. Under the top I want a shelf with dividers so the bins stay put. Rounded corners would be nice but not required. Beginner here.

¾″ plywood

Start from this

Unrated

60″W × 26″D × 30″H

Walnut Slab Desk on Hairpin Legs · 4 parts

Slab desk: 60 inch long walnut slab, 1.75 thick, 26 deep, on four steel hairpin legs so it's about 30 tall. I'll buy the legs.

¾″ hardwood

Start from this

Unrated

96″W × 36″D × 30″H

Eight-Foot Farmhouse Table · 6 parts

8 foot farmhouse dining table built from 2x6s, 36 inches wide, seats eight. Chunky 4x4 legs and a stretcher along the bottom. I've built a workbench before and that's about it.

2×6

Start from this

Unrated

60″W × 30″D × 30″H

Cedar Patio Slat Table · 7 parts

Outdoor patio table from cedar 2x4s, 60 x 30, slatted top with gaps for drainage. Something I can leave out all year. Kreg jig and a circular saw.

2×4

Start from this

Unrated

30″W × 10″D × 84″H

Seven-Foot Bookcase · 11 parts

Seven foot bookcase, 30 wide and 10 deep, six shelves, plywood. I'll screw it to the wall studs at the top.

¾″ plywood

Start from this

Unrated

48″W × 12″D × 60″H

Open Room Divider · 11 parts

Double-sided open shelving to divide a studio: 48 wide, 60 tall, 12 deep, no back so you can see through. Oak ply.

¾″ plywood

Start from this

Unrated

96″W × 12″D × 36″H

Eight-Foot Low Bookcase · 16 parts

Low wide bookcase along the whole wall, 8 feet long, 36 tall, 12 deep, two shelves plus top and bottom. It will hold heavy hardcovers and art books. 3/4 plywood.

¾″ plywood

Start from this

Unrated

36″W × 12″D × 36″H

Kids Cubby Grid · 7 parts

Toy storage for my daughter's room: a 3 by 3 grid of cubbies, 36 by 36 inches, with fabric bins going in. Plywood, painted.

¾″ plywood

Start from this

Unrated

60W × 40D × 180H cm

Closet Shelf Tower · 6 parts

Closet shelving tower, 1800 mm high, 600 mm wide, 400 mm deep, five shelves. Building in 18 mm melamine chipboard... or plywood if that's stronger. Fixed shelves, screws and dowels.

¾″ plywood

Start from this

Unrated

96″W × 48″D × 34″H

Track Saw Breakdown Table · 6 parts

Cutting table for a track saw with a foam top so I can break down sheet goods, 4x8 footprint, 2x4 frame. 34 inches high. Fold-down legs on one end would be great.

2×4

Start from this

Unrated

32″W × 14″D × 24″H

Shelf Sawhorse · 6 parts

Two sawhorses, 24 inches tall, 2x4s. Nothing fancy, straight legs, but I want a shelf across the bottom on each so I can stash screws and a drill.

2×4

Start from this

Unrated

48″W × 20″D × 96″H

Heavy Cantilever Lumber Rack · 4 parts

Heavy wall-mounted cantilever lumber rack, 2x4 arms, needs to hold maybe 400 lb of hardwood boards. 8 feet tall on the wall, arms 20 inches, 3 levels.

2×6

Start from this

Unrated

16″W × 12″D × 18″H

Vanity Stool · 6 parts

Small vanity stool, 18 tall, seat about 16 by 12, I'll upholster the seat myself. Straight legs, a stretcher between the sides, hardwood.

¾″ hardwood

Start from this

Unrated

78″W × 42″D × 34″H

Twin Daybed · 8 parts

Daybed for a twin mattress, painted, with a back and two arms but open at the front. Built from 2x lumber. Should sit against the wall on the long side.

2×6

Start from this

Unrated

60″W × 14″D × 17″H

Half-Inch Ply Garage Bench · 5 parts

Cheap bench for the garage from half inch plywood and 1x4s. Five feet long, 14 deep, 17 high. I know it's thin but that's what I've got.

½″ plywood

Start from this

Unrated

30″W × 9″D × 8″H

Railing Window Box · 6 parts

I need a window box for my porch railing, about 30 inches long. Half inch plywood is what I have. Needs drainage holes and something to hook it over the rail.

½″ plywood

Start from this

Unrated

12″W × 12″D × 36″H

Tall Standing-Desk Stool · 6 parts

Tall stool for my standing desk, seat at 36 inches, 12 inch square seat, oak. Two footrest levels, since the thing is so tall.

¾″ hardwood

Start from this

Unrated

60″W × 20″D × 18″H

Slatted Garden Bench · 5 parts

Simple slatted garden bench out of 2x4s, about 5 feet long. Outdoor, so it needs to handle rain. I'm a beginner with a miter saw and a drill.

2×4

Start from this

Unrated

96″W × 13″D × 18″H

Eight-Foot Farmhouse Bench · 5 parts

Farmhouse dining bench, 8 feet long to seat six kids on one side of our long table. Thick hardwood top, 13 inches wide, 18 high. Nothing under the seat but aprons.

8/4″ hardwood

Start from this

Unrated

60″W × 16″D × 18″H

End-Of-Bed Bench · 6 parts

End-of-bed bench, 60 wide, 16 deep, 18 tall, walnut legs and stretchers, plywood seat I'll pad and upholster. Mortise and tenon if possible.

¾″ hardwood

Start from this

Unrated

14″W × 14″D × 30″H

Backless Bar Stool · 6 parts

Backless bar stool, 30 inches to the seat, square hardwood seat about 14 inches, with a footrest rung all the way around. Oak if I can afford it.

¾″ hardwood

Start from this

Unrated

48″W × 22″D × 60″H

Classic Potting Bench · 14 parts

Classic potting bench: 48 inches wide, 22 deep, counter at 36, with a lower shelf for bags of soil and a small shelf up high at the back. Nothing fancy.

2×4

Start from this

Unrated

36″W × 36″D × 32″H

Rodent-Proof Compost Bin · 7 parts

Enclosed compost bin, 36 inch cube-ish, from plywood so rodents can't get in. Vent slots on the sides, a hinged lid, and a front hatch at the bottom to dig out finished compost.

¾″ plywood

Start from this

Unrated

72″W × 18″D × 18″H

Fire Pit Bench · 6 parts

Six foot long bench for the fire pit, 18 inches tall and 18 deep. Three 2x6 planks for the seat on a 2x4 frame. Three people will sit on it.

2×6

Start from this

Unrated

18″W × 16″D × 34″H

Toddler Learning Tower · 5 parts

Learning tower so my 2 year old can stand at the kitchen counter. Standing platform about 20 inches up, rail around the top, steps down low, back and sides a little wider at the bottom if you can. 3/4 plywood.

¾″ plywood

Start from this

Unrated

60W × 40D × 42H cm

Rolling Toy Bin · 7 parts

Roughly 60 cm by 40 cm and 40 cm tall rolling toy bin with a divider down the middle so the trucks and the dinosaurs stay separate. 12mm plywood. Four locking casters. No lid.

½″ plywood

Start from this

Unrated

120W × 45D × 75H cm

Terrarium Stand with Lower Shelf · 8 parts

Stand for my 120 x 45 cm terrarium (bearded dragon). Total height about 75 cm, with a lower shelf for the tubs of crickets and the heat lamp timers. Solid pine 2x4 frame and 18mm board for the top and shelf.

2×4

Start from this

Unrated

24″W × 12″D × 16″H

Raised Double Dog Feeder · 4 parts

Need a raised double feeder for my lab, two 8 inch diameter steel bowls that drop into holes, top about 16 inches off the floor, roughly 24 x 12. Something that looks nice in the kitchen.

¾″ hardwood

Start from this

Unrated

72″W × 30″D × 22″H

Six-Foot Lego Table · 7 parts

Big Lego table for the playroom: 6 feet long, 30 wide, 22 high so the kids can stand or sit on stools. Plain top with a low lip so pieces don't roll off. 2x4 legs and apron, plywood top.

¾″ plywood

Start from this

Unrated

14.5″W × 13.5″D × 12.75″H

LP Record Crate · 5 parts

LP record crate for around 40 records, 3/4 ply with a hand hole on each side. Butt joints and screws, keep it easy.

¾″ plywood

Start from this

Unrated

14″W × 14″D × 18″H

Slat-Top Plant Stand · 6 parts

Indoor plant stand, 14 inches square and 18 tall, with a slatted top so water drains. Pine slats on chunky legs. Pocket hole jig and a drill, that's it.

¾″ hardwood

Start from this

Unrated

24″W × 10″D × 5″H

Oak Monitor Riser · 4 parts

Need a monitor riser for my desk, about 24 inches wide, 5 inches tall, with room underneath to slide my keyboard in. Got a table saw and a router, and some 3/4 oak.

¾″ hardwood

Start from this

Unrated

26″W × 7″D × 4″H

Offcut Monitor Riser · 2 parts

I've got a pile of 2x4 offcuts and want a monitor riser about 26 inches wide, 7 deep and 4 tall out of them. Rustic is fine.

2×4

Start from this

Unrated

26″W × 14″D × 60″H

Walnut Floor Lamp · 4 parts

Five-foot floor lamp with a walnut post, a wide flat base and an arm that curves over a reading chair. Keep it minimal.

8/4″ hardwood

Start from this

Unrated

36″W × 16″D × 22″H

Kid-Safe Toy Chest · 10 parts

Toy chest for a 3 year old, 36 x 16 x 18, 3/4 plywood. The lid has to be safe so it can't slam - soft-close hinges or a lid support - and no pinch points. Rounded corners are a bonus.

¾″ plywood

Start from this

Unrated

14″W × 9″D × 8.5″H

Sewing Box With Tray · 11 parts

Sewing box with a lift-out tray, roughly 14 x 9 x 8, plywood. Lid on hinges with a latch. Tray sits on ledges inside with a divider for thread.

½″ plywood

Start from this

Unrated

20″W × 14″D × 29″H

Rolling Pet Food Bin · 8 parts

Rolling bin for 40 lb of dog food. About 20 x 14 x 24 tall, lid that hinges up, on four locking casters. Plywood, screws and glue.

¾″ plywood

Start from this

Unrated

42″W × 19″D × 24″H

Hardwood Blanket Chest · 10 parts

Building a blanket chest for the foot of our bed. Around 42 inches long, 19 deep, hinged lid, sits on a little plinth. Solid hardwood, I have a table saw and a router.

¾″ hardwood

Start from this

Unrated

48″W × 14″D × 18″H

Slat-Top Entry Bench · 17 parts

A slat-top entry bench — five gapped seat slats on cleats, four legs, and an apron frame, about four feet long.

¾″ hardwood

Start from this

Unrated

16″W × 16″D × 24″H

Shop Stool With Shelf · 7 parts

Shop stool made from 2x4 offcuts and a chunk of plywood for the seat. 24 inches tall, 16 square, with a lower shelf for my dust mask and a foot rest.

2×4

Start from this

Unrated

18″W × 12″D × 10″H

18" Storage Box · 6 parts

A plywood storage box with a lift-off lid, about 18 inches wide

½″ plywood

Start from this

Unrated

30″W × 13″D × 44″H

Walnut Record Shelf · 5 parts

A record shelf for vinyl, 30 inches wide with 2 shelves, walnut

¾″ hardwood

Start from this

Unrated

30″W × 16″D × 84″H

Tall Pantry Shelving · 5 parts

Tall pantry shelving unit, 7 feet tall, 30 inches wide, plywood

¾″ plywood

Start from this

Unrated

36″W × 12″D × 48″H

Garage Bookshelf · 6 parts

A sturdy bookshelf for my garage, about 4 feet tall and 3 feet wide, pine plywood

¾″ plywood

Start from this

Have your own idea?Say it in plain English. The engine drafts it and checks it before you cut.Start from scratch

The yard · bringing out the builds

Gallery

The yard · 48 builds on the rack

Gallery

Real builds the engine drew and checked. Pick one, change what you like, and the workshop drafts your version.

Start from scratch

Unrated

48″W × 24″D × 42″H

Pub-Height Table With Foot Rail · 7 parts

I want a pub table, 42 inches to the top, 48 x 24, with a foot rail for the bar stools. Maple. Beefy. I have a full shop.

8/4″ hardwood

Start from this

Unrated

48″W × 20″D × 65″H

Cedar Potting Bench · 9 parts

Potting bench out of cedar, about 48 long and 20 deep. Slatted top and slatted lower shelf, 36 inch counter height, with a back splash and a rail up high for hanging trowels.

2×4

Start from this

Unrated

60″W × 12″D × 42″H

Narrow Bar Counter · 7 parts

Skinny bar-height counter table to go behind our sofa, 60 long, only 12 inches deep, 42 inches high, with one shelf underneath.

¾″ hardwood

Start from this

Unrated

120W × 30D × 80H cm

Slim Oak Console · 7 parts

Slim console, 120 cm x 30 cm and 80 cm high, with a shelf 20 cm off the floor. Oak, legs 4 cm square. Metric only please.

¾″ hardwood

Start from this

Unrated

36″W × 24″D × 22″H

Kids Art Table · 7 parts

Art table for my two kids, 36 x 24 and 22 inches tall. Under the top I want a shelf with dividers so the bins stay put. Rounded corners would be nice but not required. Beginner here.

¾″ plywood

Start from this

Unrated

60″W × 26″D × 30″H

Walnut Slab Desk on Hairpin Legs · 4 parts

Slab desk: 60 inch long walnut slab, 1.75 thick, 26 deep, on four steel hairpin legs so it's about 30 tall. I'll buy the legs.

¾″ hardwood

Start from this

Unrated

96″W × 36″D × 30″H

Eight-Foot Farmhouse Table · 6 parts

8 foot farmhouse dining table built from 2x6s, 36 inches wide, seats eight. Chunky 4x4 legs and a stretcher along the bottom. I've built a workbench before and that's about it.

2×6

Start from this

Unrated

60″W × 30″D × 30″H

Cedar Patio Slat Table · 7 parts

Outdoor patio table from cedar 2x4s, 60 x 30, slatted top with gaps for drainage. Something I can leave out all year. Kreg jig and a circular saw.

2×4

Start from this

Unrated

30″W × 10″D × 84″H

Seven-Foot Bookcase · 11 parts

Seven foot bookcase, 30 wide and 10 deep, six shelves, plywood. I'll screw it to the wall studs at the top.

¾″ plywood

Start from this

Unrated

48″W × 12″D × 60″H

Open Room Divider · 11 parts

Double-sided open shelving to divide a studio: 48 wide, 60 tall, 12 deep, no back so you can see through. Oak ply.

¾″ plywood

Start from this

Unrated

96″W × 12″D × 36″H

Eight-Foot Low Bookcase · 16 parts

Low wide bookcase along the whole wall, 8 feet long, 36 tall, 12 deep, two shelves plus top and bottom. It will hold heavy hardcovers and art books. 3/4 plywood.

¾″ plywood

Start from this

Unrated

36″W × 12″D × 36″H

Kids Cubby Grid · 7 parts

Toy storage for my daughter's room: a 3 by 3 grid of cubbies, 36 by 36 inches, with fabric bins going in. Plywood, painted.

¾″ plywood

Start from this

Unrated

60W × 40D × 180H cm

Closet Shelf Tower · 6 parts

Closet shelving tower, 1800 mm high, 600 mm wide, 400 mm deep, five shelves. Building in 18 mm melamine chipboard... or plywood if that's stronger. Fixed shelves, screws and dowels.

¾″ plywood

Start from this

Unrated

96″W × 48″D × 34″H

Track Saw Breakdown Table · 6 parts

Cutting table for a track saw with a foam top so I can break down sheet goods, 4x8 footprint, 2x4 frame. 34 inches high. Fold-down legs on one end would be great.

2×4

Start from this

Unrated

32″W × 14″D × 24″H

Shelf Sawhorse · 6 parts

Two sawhorses, 24 inches tall, 2x4s. Nothing fancy, straight legs, but I want a shelf across the bottom on each so I can stash screws and a drill.

2×4

Start from this

Unrated

48″W × 20″D × 96″H

Heavy Cantilever Lumber Rack · 4 parts

Heavy wall-mounted cantilever lumber rack, 2x4 arms, needs to hold maybe 400 lb of hardwood boards. 8 feet tall on the wall, arms 20 inches, 3 levels.

2×6

Start from this

Unrated

16″W × 12″D × 18″H

Vanity Stool · 6 parts

Small vanity stool, 18 tall, seat about 16 by 12, I'll upholster the seat myself. Straight legs, a stretcher between the sides, hardwood.

¾″ hardwood

Start from this

Unrated

78″W × 42″D × 34″H

Twin Daybed · 8 parts

Daybed for a twin mattress, painted, with a back and two arms but open at the front. Built from 2x lumber. Should sit against the wall on the long side.

2×6

Start from this

Unrated

60″W × 14″D × 17″H

Half-Inch Ply Garage Bench · 5 parts

Cheap bench for the garage from half inch plywood and 1x4s. Five feet long, 14 deep, 17 high. I know it's thin but that's what I've got.

½″ plywood

Start from this

Unrated

30″W × 9″D × 8″H

Railing Window Box · 6 parts

I need a window box for my porch railing, about 30 inches long. Half inch plywood is what I have. Needs drainage holes and something to hook it over the rail.

½″ plywood

Start from this

Unrated

12″W × 12″D × 36″H

Tall Standing-Desk Stool · 6 parts

Tall stool for my standing desk, seat at 36 inches, 12 inch square seat, oak. Two footrest levels, since the thing is so tall.

¾″ hardwood

Start from this

Unrated

60″W × 20″D × 18″H

Slatted Garden Bench · 5 parts

Simple slatted garden bench out of 2x4s, about 5 feet long. Outdoor, so it needs to handle rain. I'm a beginner with a miter saw and a drill.

2×4

Start from this

Unrated

96″W × 13″D × 18″H

Eight-Foot Farmhouse Bench · 5 parts

Farmhouse dining bench, 8 feet long to seat six kids on one side of our long table. Thick hardwood top, 13 inches wide, 18 high. Nothing under the seat but aprons.

8/4″ hardwood

Start from this

Unrated

60″W × 16″D × 18″H

End-Of-Bed Bench · 6 parts

End-of-bed bench, 60 wide, 16 deep, 18 tall, walnut legs and stretchers, plywood seat I'll pad and upholster. Mortise and tenon if possible.

¾″ hardwood

Start from this

Unrated

14″W × 14″D × 30″H

Backless Bar Stool · 6 parts

Backless bar stool, 30 inches to the seat, square hardwood seat about 14 inches, with a footrest rung all the way around. Oak if I can afford it.

¾″ hardwood

Start from this

Unrated

48″W × 22″D × 60″H

Classic Potting Bench · 14 parts

Classic potting bench: 48 inches wide, 22 deep, counter at 36, with a lower shelf for bags of soil and a small shelf up high at the back. Nothing fancy.

2×4

Start from this

Unrated

36″W × 36″D × 32″H

Rodent-Proof Compost Bin · 7 parts

Enclosed compost bin, 36 inch cube-ish, from plywood so rodents can't get in. Vent slots on the sides, a hinged lid, and a front hatch at the bottom to dig out finished compost.

¾″ plywood

Start from this

Unrated

72″W × 18″D × 18″H

Fire Pit Bench · 6 parts

Six foot long bench for the fire pit, 18 inches tall and 18 deep. Three 2x6 planks for the seat on a 2x4 frame. Three people will sit on it.

2×6

Start from this

Unrated

18″W × 16″D × 34″H

Toddler Learning Tower · 5 parts

Learning tower so my 2 year old can stand at the kitchen counter. Standing platform about 20 inches up, rail around the top, steps down low, back and sides a little wider at the bottom if you can. 3/4 plywood.

¾″ plywood

Start from this

Unrated

60W × 40D × 42H cm

Rolling Toy Bin · 7 parts

Roughly 60 cm by 40 cm and 40 cm tall rolling toy bin with a divider down the middle so the trucks and the dinosaurs stay separate. 12mm plywood. Four locking casters. No lid.

½″ plywood

Start from this

Unrated

120W × 45D × 75H cm

Terrarium Stand with Lower Shelf · 8 parts

Stand for my 120 x 45 cm terrarium (bearded dragon). Total height about 75 cm, with a lower shelf for the tubs of crickets and the heat lamp timers. Solid pine 2x4 frame and 18mm board for the top and shelf.

2×4

Start from this

Unrated

24″W × 12″D × 16″H

Raised Double Dog Feeder · 4 parts

Need a raised double feeder for my lab, two 8 inch diameter steel bowls that drop into holes, top about 16 inches off the floor, roughly 24 x 12. Something that looks nice in the kitchen.

¾″ hardwood

Start from this

Unrated

72″W × 30″D × 22″H

Six-Foot Lego Table · 7 parts

Big Lego table for the playroom: 6 feet long, 30 wide, 22 high so the kids can stand or sit on stools. Plain top with a low lip so pieces don't roll off. 2x4 legs and apron, plywood top.

¾″ plywood

Start from this

Unrated

14.5″W × 13.5″D × 12.75″H

LP Record Crate · 5 parts

LP record crate for around 40 records, 3/4 ply with a hand hole on each side. Butt joints and screws, keep it easy.

¾″ plywood

Start from this

Unrated

14″W × 14″D × 18″H

Slat-Top Plant Stand · 6 parts

Indoor plant stand, 14 inches square and 18 tall, with a slatted top so water drains. Pine slats on chunky legs. Pocket hole jig and a drill, that's it.

¾″ hardwood

Start from this

Unrated

24″W × 10″D × 5″H

Oak Monitor Riser · 4 parts

Need a monitor riser for my desk, about 24 inches wide, 5 inches tall, with room underneath to slide my keyboard in. Got a table saw and a router, and some 3/4 oak.

¾″ hardwood

Start from this

Unrated

26″W × 7″D × 4″H

Offcut Monitor Riser · 2 parts

I've got a pile of 2x4 offcuts and want a monitor riser about 26 inches wide, 7 deep and 4 tall out of them. Rustic is fine.

2×4

Start from this

Unrated

26″W × 14″D × 60″H

Walnut Floor Lamp · 4 parts

Five-foot floor lamp with a walnut post, a wide flat base and an arm that curves over a reading chair. Keep it minimal.

8/4″ hardwood

Start from this

Unrated

36″W × 16″D × 22″H

Kid-Safe Toy Chest · 10 parts

Toy chest for a 3 year old, 36 x 16 x 18, 3/4 plywood. The lid has to be safe so it can't slam - soft-close hinges or a lid support - and no pinch points. Rounded corners are a bonus.

¾″ plywood

Start from this

Unrated

14″W × 9″D × 8.5″H

Sewing Box With Tray · 11 parts

Sewing box with a lift-out tray, roughly 14 x 9 x 8, plywood. Lid on hinges with a latch. Tray sits on ledges inside with a divider for thread.

½″ plywood

Start from this

Unrated

20″W × 14″D × 29″H

Rolling Pet Food Bin · 8 parts

Rolling bin for 40 lb of dog food. About 20 x 14 x 24 tall, lid that hinges up, on four locking casters. Plywood, screws and glue.

¾″ plywood

Start from this

Unrated

42″W × 19″D × 24″H

Hardwood Blanket Chest · 10 parts

Building a blanket chest for the foot of our bed. Around 42 inches long, 19 deep, hinged lid, sits on a little plinth. Solid hardwood, I have a table saw and a router.

¾″ hardwood

Start from this

Unrated

48″W × 14″D × 18″H

Slat-Top Entry Bench · 17 parts

A slat-top entry bench — five gapped seat slats on cleats, four legs, and an apron frame, about four feet long.

¾″ hardwood

Start from this

Unrated

16″W × 16″D × 24″H

Shop Stool With Shelf · 7 parts

Shop stool made from 2x4 offcuts and a chunk of plywood for the seat. 24 inches tall, 16 square, with a lower shelf for my dust mask and a foot rest.

2×4

Start from this

Unrated

18″W × 12″D × 10″H

18" Storage Box · 6 parts

A plywood storage box with a lift-off lid, about 18 inches wide

½″ plywood

Start from this

Unrated

30″W × 13″D × 44″H

Walnut Record Shelf · 5 parts

A record shelf for vinyl, 30 inches wide with 2 shelves, walnut

¾″ hardwood

Start from this

Unrated

30″W × 16″D × 84″H

Tall Pantry Shelving · 5 parts

Tall pantry shelving unit, 7 feet tall, 30 inches wide, plywood

¾″ plywood

Start from this

Unrated

36″W × 12″D × 48″H

Garage Bookshelf · 6 parts

A sturdy bookshelf for my garage, about 4 feet tall and 3 feet wide, pine plywood

¾″ plywood

Start from this

Have your own idea?Say it in plain English. The engine drafts it and checks it before you cut.Start from scratch

Gallery

“I want a pub table, 42 inches to the top, 48 x 24, with a foot rail for the bar stools. Maple. Beefy. I have a full shop.”

“Potting bench out of cedar, about 48 long and 20 deep. Slatted top and slatted lower shelf, 36 inch counter height, with a back splash and a rail up high for hanging trowels.”

“Skinny bar-height counter table to go behind our sofa, 60 long, only 12 inches deep, 42 inches high, with one shelf underneath.”

“Slim console, 120 cm x 30 cm and 80 cm high, with a shelf 20 cm off the floor. Oak, legs 4 cm square. Metric only please.”

“Art table for my two kids, 36 x 24 and 22 inches tall. Under the top I want a shelf with dividers so the bins stay put. Rounded corners would be nice but not required. Beginner here.”

“Slab desk: 60 inch long walnut slab, 1.75 thick, 26 deep, on four steel hairpin legs so it's about 30 tall. I'll buy the legs.”

“8 foot farmhouse dining table built from 2x6s, 36 inches wide, seats eight. Chunky 4x4 legs and a stretcher along the bottom. I've built a workbench before and that's about it.”

“Outdoor patio table from cedar 2x4s, 60 x 30, slatted top with gaps for drainage. Something I can leave out all year. Kreg jig and a circular saw.”

“Seven foot bookcase, 30 wide and 10 deep, six shelves, plywood. I'll screw it to the wall studs at the top.”

“Double-sided open shelving to divide a studio: 48 wide, 60 tall, 12 deep, no back so you can see through. Oak ply.”

“Low wide bookcase along the whole wall, 8 feet long, 36 tall, 12 deep, two shelves plus top and bottom. It will hold heavy hardcovers and art books. 3/4 plywood.”

“Toy storage for my daughter's room: a 3 by 3 grid of cubbies, 36 by 36 inches, with fabric bins going in. Plywood, painted.”

“Closet shelving tower, 1800 mm high, 600 mm wide, 400 mm deep, five shelves. Building in 18 mm melamine chipboard... or plywood if that's stronger. Fixed shelves, screws and dowels.”

“Cutting table for a track saw with a foam top so I can break down sheet goods, 4x8 footprint, 2x4 frame. 34 inches high. Fold-down legs on one end would be great.”

“Two sawhorses, 24 inches tall, 2x4s. Nothing fancy, straight legs, but I want a shelf across the bottom on each so I can stash screws and a drill.”

“Heavy wall-mounted cantilever lumber rack, 2x4 arms, needs to hold maybe 400 lb of hardwood boards. 8 feet tall on the wall, arms 20 inches, 3 levels.”

“Small vanity stool, 18 tall, seat about 16 by 12, I'll upholster the seat myself. Straight legs, a stretcher between the sides, hardwood.”

“Daybed for a twin mattress, painted, with a back and two arms but open at the front. Built from 2x lumber. Should sit against the wall on the long side.”

“Cheap bench for the garage from half inch plywood and 1x4s. Five feet long, 14 deep, 17 high. I know it's thin but that's what I've got.”

“I need a window box for my porch railing, about 30 inches long. Half inch plywood is what I have. Needs drainage holes and something to hook it over the rail.”

“Tall stool for my standing desk, seat at 36 inches, 12 inch square seat, oak. Two footrest levels, since the thing is so tall.”

“Simple slatted garden bench out of 2x4s, about 5 feet long. Outdoor, so it needs to handle rain. I'm a beginner with a miter saw and a drill.”

“Farmhouse dining bench, 8 feet long to seat six kids on one side of our long table. Thick hardwood top, 13 inches wide, 18 high. Nothing under the seat but aprons.”

“End-of-bed bench, 60 wide, 16 deep, 18 tall, walnut legs and stretchers, plywood seat I'll pad and upholster. Mortise and tenon if possible.”

“Backless bar stool, 30 inches to the seat, square hardwood seat about 14 inches, with a footrest rung all the way around. Oak if I can afford it.”

“Classic potting bench: 48 inches wide, 22 deep, counter at 36, with a lower shelf for bags of soil and a small shelf up high at the back. Nothing fancy.”

“Enclosed compost bin, 36 inch cube-ish, from plywood so rodents can't get in. Vent slots on the sides, a hinged lid, and a front hatch at the bottom to dig out finished compost.”

“Six foot long bench for the fire pit, 18 inches tall and 18 deep. Three 2x6 planks for the seat on a 2x4 frame. Three people will sit on it.”

“Learning tower so my 2 year old can stand at the kitchen counter. Standing platform about 20 inches up, rail around the top, steps down low, back and sides a little wider at the bottom if you can. 3/4 plywood.”

“Roughly 60 cm by 40 cm and 40 cm tall rolling toy bin with a divider down the middle so the trucks and the dinosaurs stay separate. 12mm plywood. Four locking casters. No lid.”

“Stand for my 120 x 45 cm terrarium (bearded dragon). Total height about 75 cm, with a lower shelf for the tubs of crickets and the heat lamp timers. Solid pine 2x4 frame and 18mm board for the top and shelf.”

“Need a raised double feeder for my lab, two 8 inch diameter steel bowls that drop into holes, top about 16 inches off the floor, roughly 24 x 12. Something that looks nice in the kitchen.”

“Big Lego table for the playroom: 6 feet long, 30 wide, 22 high so the kids can stand or sit on stools. Plain top with a low lip so pieces don't roll off. 2x4 legs and apron, plywood top.”

“LP record crate for around 40 records, 3/4 ply with a hand hole on each side. Butt joints and screws, keep it easy.”

“Indoor plant stand, 14 inches square and 18 tall, with a slatted top so water drains. Pine slats on chunky legs. Pocket hole jig and a drill, that's it.”

“Need a monitor riser for my desk, about 24 inches wide, 5 inches tall, with room underneath to slide my keyboard in. Got a table saw and a router, and some 3/4 oak.”

“I've got a pile of 2x4 offcuts and want a monitor riser about 26 inches wide, 7 deep and 4 tall out of them. Rustic is fine.”

“Five-foot floor lamp with a walnut post, a wide flat base and an arm that curves over a reading chair. Keep it minimal.”

“Toy chest for a 3 year old, 36 x 16 x 18, 3/4 plywood. The lid has to be safe so it can't slam - soft-close hinges or a lid support - and no pinch points. Rounded corners are a bonus.”

“Sewing box with a lift-out tray, roughly 14 x 9 x 8, plywood. Lid on hinges with a latch. Tray sits on ledges inside with a divider for thread.”

“Rolling bin for 40 lb of dog food. About 20 x 14 x 24 tall, lid that hinges up, on four locking casters. Plywood, screws and glue.”

“Building a blanket chest for the foot of our bed. Around 42 inches long, 19 deep, hinged lid, sits on a little plinth. Solid hardwood, I have a table saw and a router.”

“A slat-top entry bench — five gapped seat slats on cleats, four legs, and an apron frame, about four feet long.”

“Shop stool made from 2x4 offcuts and a chunk of plywood for the seat. 24 inches tall, 16 square, with a lower shelf for my dust mask and a foot rest.”

“A plywood storage box with a lift-off lid, about 18 inches wide”

“A record shelf for vinyl, 30 inches wide with 2 shelves, walnut”

“Tall pantry shelving unit, 7 feet tall, 30 inches wide, plywood”

“A sturdy bookshelf for my garage, about 4 feet tall and 3 feet wide, pine plywood”

Gallery

“I want a pub table, 42 inches to the top, 48 x 24, with a foot rail for the bar stools. Maple. Beefy. I have a full shop.”

“Potting bench out of cedar, about 48 long and 20 deep. Slatted top and slatted lower shelf, 36 inch counter height, with a back splash and a rail up high for hanging trowels.”

“Skinny bar-height counter table to go behind our sofa, 60 long, only 12 inches deep, 42 inches high, with one shelf underneath.”

“Slim console, 120 cm x 30 cm and 80 cm high, with a shelf 20 cm off the floor. Oak, legs 4 cm square. Metric only please.”

“Art table for my two kids, 36 x 24 and 22 inches tall. Under the top I want a shelf with dividers so the bins stay put. Rounded corners would be nice but not required. Beginner here.”

“Slab desk: 60 inch long walnut slab, 1.75 thick, 26 deep, on four steel hairpin legs so it's about 30 tall. I'll buy the legs.”

“8 foot farmhouse dining table built from 2x6s, 36 inches wide, seats eight. Chunky 4x4 legs and a stretcher along the bottom. I've built a workbench before and that's about it.”

“Outdoor patio table from cedar 2x4s, 60 x 30, slatted top with gaps for drainage. Something I can leave out all year. Kreg jig and a circular saw.”

“Seven foot bookcase, 30 wide and 10 deep, six shelves, plywood. I'll screw it to the wall studs at the top.”

“Double-sided open shelving to divide a studio: 48 wide, 60 tall, 12 deep, no back so you can see through. Oak ply.”

“Low wide bookcase along the whole wall, 8 feet long, 36 tall, 12 deep, two shelves plus top and bottom. It will hold heavy hardcovers and art books. 3/4 plywood.”

“Toy storage for my daughter's room: a 3 by 3 grid of cubbies, 36 by 36 inches, with fabric bins going in. Plywood, painted.”

“Closet shelving tower, 1800 mm high, 600 mm wide, 400 mm deep, five shelves. Building in 18 mm melamine chipboard... or plywood if that's stronger. Fixed shelves, screws and dowels.”

“Cutting table for a track saw with a foam top so I can break down sheet goods, 4x8 footprint, 2x4 frame. 34 inches high. Fold-down legs on one end would be great.”

“Two sawhorses, 24 inches tall, 2x4s. Nothing fancy, straight legs, but I want a shelf across the bottom on each so I can stash screws and a drill.”

“Heavy wall-mounted cantilever lumber rack, 2x4 arms, needs to hold maybe 400 lb of hardwood boards. 8 feet tall on the wall, arms 20 inches, 3 levels.”

“Small vanity stool, 18 tall, seat about 16 by 12, I'll upholster the seat myself. Straight legs, a stretcher between the sides, hardwood.”

“Daybed for a twin mattress, painted, with a back and two arms but open at the front. Built from 2x lumber. Should sit against the wall on the long side.”

“Cheap bench for the garage from half inch plywood and 1x4s. Five feet long, 14 deep, 17 high. I know it's thin but that's what I've got.”

“I need a window box for my porch railing, about 30 inches long. Half inch plywood is what I have. Needs drainage holes and something to hook it over the rail.”

“Tall stool for my standing desk, seat at 36 inches, 12 inch square seat, oak. Two footrest levels, since the thing is so tall.”

“Simple slatted garden bench out of 2x4s, about 5 feet long. Outdoor, so it needs to handle rain. I'm a beginner with a miter saw and a drill.”

“Farmhouse dining bench, 8 feet long to seat six kids on one side of our long table. Thick hardwood top, 13 inches wide, 18 high. Nothing under the seat but aprons.”

“End-of-bed bench, 60 wide, 16 deep, 18 tall, walnut legs and stretchers, plywood seat I'll pad and upholster. Mortise and tenon if possible.”

“Backless bar stool, 30 inches to the seat, square hardwood seat about 14 inches, with a footrest rung all the way around. Oak if I can afford it.”

“Classic potting bench: 48 inches wide, 22 deep, counter at 36, with a lower shelf for bags of soil and a small shelf up high at the back. Nothing fancy.”

“Enclosed compost bin, 36 inch cube-ish, from plywood so rodents can't get in. Vent slots on the sides, a hinged lid, and a front hatch at the bottom to dig out finished compost.”

“Six foot long bench for the fire pit, 18 inches tall and 18 deep. Three 2x6 planks for the seat on a 2x4 frame. Three people will sit on it.”

“Learning tower so my 2 year old can stand at the kitchen counter. Standing platform about 20 inches up, rail around the top, steps down low, back and sides a little wider at the bottom if you can. 3/4 plywood.”

“Roughly 60 cm by 40 cm and 40 cm tall rolling toy bin with a divider down the middle so the trucks and the dinosaurs stay separate. 12mm plywood. Four locking casters. No lid.”

I want a pub table, 42 inches to the top, 48 x 24, with a foot rail for the bar stools. Maple. Beefy. I have a full shop.

Potting bench out of cedar, about 48 long and 20 deep. Slatted top and slatted lower shelf, 36 inch counter height, with a back splash and a rail up high for hanging trowels.

Skinny bar-height counter table to go behind our sofa, 60 long, only 12 inches deep, 42 inches high, with one shelf underneath.

Slim console, 120 cm x 30 cm and 80 cm high, with a shelf 20 cm off the floor. Oak, legs 4 cm square. Metric only please.

Art table for my two kids, 36 x 24 and 22 inches tall. Under the top I want a shelf with dividers so the bins stay put. Rounded corners would be nice but not required. Beginner here.

Slab desk: 60 inch long walnut slab, 1.75 thick, 26 deep, on four steel hairpin legs so it's about 30 tall. I'll buy the legs.

8 foot farmhouse dining table built from 2x6s, 36 inches wide, seats eight. Chunky 4x4 legs and a stretcher along the bottom. I've built a workbench before and that's about it.

Outdoor patio table from cedar 2x4s, 60 x 30, slatted top with gaps for drainage. Something I can leave out all year. Kreg jig and a circular saw.

Seven foot bookcase, 30 wide and 10 deep, six shelves, plywood. I'll screw it to the wall studs at the top.

Double-sided open shelving to divide a studio: 48 wide, 60 tall, 12 deep, no back so you can see through. Oak ply.

Low wide bookcase along the whole wall, 8 feet long, 36 tall, 12 deep, two shelves plus top and bottom. It will hold heavy hardcovers and art books. 3/4 plywood.

Toy storage for my daughter's room: a 3 by 3 grid of cubbies, 36 by 36 inches, with fabric bins going in. Plywood, painted.

Closet shelving tower, 1800 mm high, 600 mm wide, 400 mm deep, five shelves. Building in 18 mm melamine chipboard... or plywood if that's stronger. Fixed shelves, screws and dowels.

Cutting table for a track saw with a foam top so I can break down sheet goods, 4x8 footprint, 2x4 frame. 34 inches high. Fold-down legs on one end would be great.

Two sawhorses, 24 inches tall, 2x4s. Nothing fancy, straight legs, but I want a shelf across the bottom on each so I can stash screws and a drill.

Heavy wall-mounted cantilever lumber rack, 2x4 arms, needs to hold maybe 400 lb of hardwood boards. 8 feet tall on the wall, arms 20 inches, 3 levels.

Small vanity stool, 18 tall, seat about 16 by 12, I'll upholster the seat myself. Straight legs, a stretcher between the sides, hardwood.

Daybed for a twin mattress, painted, with a back and two arms but open at the front. Built from 2x lumber. Should sit against the wall on the long side.

Cheap bench for the garage from half inch plywood and 1x4s. Five feet long, 14 deep, 17 high. I know it's thin but that's what I've got.

I need a window box for my porch railing, about 30 inches long. Half inch plywood is what I have. Needs drainage holes and something to hook it over the rail.

Tall stool for my standing desk, seat at 36 inches, 12 inch square seat, oak. Two footrest levels, since the thing is so tall.

Simple slatted garden bench out of 2x4s, about 5 feet long. Outdoor, so it needs to handle rain. I'm a beginner with a miter saw and a drill.

Farmhouse dining bench, 8 feet long to seat six kids on one side of our long table. Thick hardwood top, 13 inches wide, 18 high. Nothing under the seat but aprons.

End-of-bed bench, 60 wide, 16 deep, 18 tall, walnut legs and stretchers, plywood seat I'll pad and upholster. Mortise and tenon if possible.

Backless bar stool, 30 inches to the seat, square hardwood seat about 14 inches, with a footrest rung all the way around. Oak if I can afford it.

Classic potting bench: 48 inches wide, 22 deep, counter at 36, with a lower shelf for bags of soil and a small shelf up high at the back. Nothing fancy.

Enclosed compost bin, 36 inch cube-ish, from plywood so rodents can't get in. Vent slots on the sides, a hinged lid, and a front hatch at the bottom to dig out finished compost.

Six foot long bench for the fire pit, 18 inches tall and 18 deep. Three 2x6 planks for the seat on a 2x4 frame. Three people will sit on it.

Learning tower so my 2 year old can stand at the kitchen counter. Standing platform about 20 inches up, rail around the top, steps down low, back and sides a little wider at the bottom if you can. 3/4 plywood.

Roughly 60 cm by 40 cm and 40 cm tall rolling toy bin with a divider down the middle so the trucks and the dinosaurs stay separate. 12mm plywood. Four locking casters. No lid.

Stand for my 120 x 45 cm terrarium (bearded dragon). Total height about 75 cm, with a lower shelf for the tubs of crickets and the heat lamp timers. Solid pine 2x4 frame and 18mm board for the top and shelf.

Need a raised double feeder for my lab, two 8 inch diameter steel bowls that drop into holes, top about 16 inches off the floor, roughly 24 x 12. Something that looks nice in the kitchen.

Big Lego table for the playroom: 6 feet long, 30 wide, 22 high so the kids can stand or sit on stools. Plain top with a low lip so pieces don't roll off. 2x4 legs and apron, plywood top.

LP record crate for around 40 records, 3/4 ply with a hand hole on each side. Butt joints and screws, keep it easy.

Indoor plant stand, 14 inches square and 18 tall, with a slatted top so water drains. Pine slats on chunky legs. Pocket hole jig and a drill, that's it.

Need a monitor riser for my desk, about 24 inches wide, 5 inches tall, with room underneath to slide my keyboard in. Got a table saw and a router, and some 3/4 oak.

I've got a pile of 2x4 offcuts and want a monitor riser about 26 inches wide, 7 deep and 4 tall out of them. Rustic is fine.

Five-foot floor lamp with a walnut post, a wide flat base and an arm that curves over a reading chair. Keep it minimal.

Toy chest for a 3 year old, 36 x 16 x 18, 3/4 plywood. The lid has to be safe so it can't slam - soft-close hinges or a lid support - and no pinch points. Rounded corners are a bonus.

Sewing box with a lift-out tray, roughly 14 x 9 x 8, plywood. Lid on hinges with a latch. Tray sits on ledges inside with a divider for thread.

Rolling bin for 40 lb of dog food. About 20 x 14 x 24 tall, lid that hinges up, on four locking casters. Plywood, screws and glue.

Building a blanket chest for the foot of our bed. Around 42 inches long, 19 deep, hinged lid, sits on a little plinth. Solid hardwood, I have a table saw and a router.

A slat-top entry bench — five gapped seat slats on cleats, four legs, and an apron frame, about four feet long.

Shop stool made from 2x4 offcuts and a chunk of plywood for the seat. 24 inches tall, 16 square, with a lower shelf for my dust mask and a foot rest.

A plywood storage box with a lift-off lid, about 18 inches wide

A record shelf for vinyl, 30 inches wide with 2 shelves, walnut

Tall pantry shelving unit, 7 feet tall, 30 inches wide, plywood

A sturdy bookshelf for my garage, about 4 feet tall and 3 feet wide, pine plywood

I want a pub table, 42 inches to the top, 48 x 24, with a foot rail for the bar stools. Maple. Beefy. I have a full shop.

Potting bench out of cedar, about 48 long and 20 deep. Slatted top and slatted lower shelf, 36 inch counter height, with a back splash and a rail up high for hanging trowels.

Skinny bar-height counter table to go behind our sofa, 60 long, only 12 inches deep, 42 inches high, with one shelf underneath.

Slim console, 120 cm x 30 cm and 80 cm high, with a shelf 20 cm off the floor. Oak, legs 4 cm square. Metric only please.

Art table for my two kids, 36 x 24 and 22 inches tall. Under the top I want a shelf with dividers so the bins stay put. Rounded corners would be nice but not required. Beginner here.

Slab desk: 60 inch long walnut slab, 1.75 thick, 26 deep, on four steel hairpin legs so it's about 30 tall. I'll buy the legs.

8 foot farmhouse dining table built from 2x6s, 36 inches wide, seats eight. Chunky 4x4 legs and a stretcher along the bottom. I've built a workbench before and that's about it.

Outdoor patio table from cedar 2x4s, 60 x 30, slatted top with gaps for drainage. Something I can leave out all year. Kreg jig and a circular saw.

Seven foot bookcase, 30 wide and 10 deep, six shelves, plywood. I'll screw it to the wall studs at the top.

Double-sided open shelving to divide a studio: 48 wide, 60 tall, 12 deep, no back so you can see through. Oak ply.

Low wide bookcase along the whole wall, 8 feet long, 36 tall, 12 deep, two shelves plus top and bottom. It will hold heavy hardcovers and art books. 3/4 plywood.

Toy storage for my daughter's room: a 3 by 3 grid of cubbies, 36 by 36 inches, with fabric bins going in. Plywood, painted.

Closet shelving tower, 1800 mm high, 600 mm wide, 400 mm deep, five shelves. Building in 18 mm melamine chipboard... or plywood if that's stronger. Fixed shelves, screws and dowels.

Cutting table for a track saw with a foam top so I can break down sheet goods, 4x8 footprint, 2x4 frame. 34 inches high. Fold-down legs on one end would be great.

Two sawhorses, 24 inches tall, 2x4s. Nothing fancy, straight legs, but I want a shelf across the bottom on each so I can stash screws and a drill.

Heavy wall-mounted cantilever lumber rack, 2x4 arms, needs to hold maybe 400 lb of hardwood boards. 8 feet tall on the wall, arms 20 inches, 3 levels.

Small vanity stool, 18 tall, seat about 16 by 12, I'll upholster the seat myself. Straight legs, a stretcher between the sides, hardwood.

Daybed for a twin mattress, painted, with a back and two arms but open at the front. Built from 2x lumber. Should sit against the wall on the long side.

Cheap bench for the garage from half inch plywood and 1x4s. Five feet long, 14 deep, 17 high. I know it's thin but that's what I've got.

I need a window box for my porch railing, about 30 inches long. Half inch plywood is what I have. Needs drainage holes and something to hook it over the rail.

Tall stool for my standing desk, seat at 36 inches, 12 inch square seat, oak. Two footrest levels, since the thing is so tall.

Simple slatted garden bench out of 2x4s, about 5 feet long. Outdoor, so it needs to handle rain. I'm a beginner with a miter saw and a drill.

Farmhouse dining bench, 8 feet long to seat six kids on one side of our long table. Thick hardwood top, 13 inches wide, 18 high. Nothing under the seat but aprons.

End-of-bed bench, 60 wide, 16 deep, 18 tall, walnut legs and stretchers, plywood seat I'll pad and upholster. Mortise and tenon if possible.

Backless bar stool, 30 inches to the seat, square hardwood seat about 14 inches, with a footrest rung all the way around. Oak if I can afford it.

Classic potting bench: 48 inches wide, 22 deep, counter at 36, with a lower shelf for bags of soil and a small shelf up high at the back. Nothing fancy.

Enclosed compost bin, 36 inch cube-ish, from plywood so rodents can't get in. Vent slots on the sides, a hinged lid, and a front hatch at the bottom to dig out finished compost.

Six foot long bench for the fire pit, 18 inches tall and 18 deep. Three 2x6 planks for the seat on a 2x4 frame. Three people will sit on it.

Learning tower so my 2 year old can stand at the kitchen counter. Standing platform about 20 inches up, rail around the top, steps down low, back and sides a little wider at the bottom if you can. 3/4 plywood.

Roughly 60 cm by 40 cm and 40 cm tall rolling toy bin with a divider down the middle so the trucks and the dinosaurs stay separate. 12mm plywood. Four locking casters. No lid.

Stand for my 120 x 45 cm terrarium (bearded dragon). Total height about 75 cm, with a lower shelf for the tubs of crickets and the heat lamp timers. Solid pine 2x4 frame and 18mm board for the top and shelf.

Need a raised double feeder for my lab, two 8 inch diameter steel bowls that drop into holes, top about 16 inches off the floor, roughly 24 x 12. Something that looks nice in the kitchen.